ChangeSet@1.1101, 2003-03-11 19:13:16-08:00, akpm@digeo.com
[PATCH] unplugging fix
Patch from Neil Brown <neilb@cse.unsw.edu.au>
Allow auto-unplugging to work for devices that do it themselves.
Auto-unplugging - and blk_unplug_work in particular - assumes that the device
uses "generic_unplug_device" for unplugging, but some devices don't. md
crashes.
So blk_unplug_work should use ->unplug_fn
ChangeSet@1.1100, 2003-03-11 17:47:56-08:00, elenstev@mesatop.com
[PATCH] Documentation spelling cleanup
This patch fixes spelling errors in the Documentation directory and was
extensively reviewed by the following people: Dan Kegel, David
Woodhouse, Joe Perches, Jared Daniel J. Smith, Michael Hayes, and
Steven Cole
ChangeSet@1.1097, 2003-03-11 16:12:46-08:00, ahaas@airmail.net
[NETFILTER]: Really apply the ipv4 C99 patches this time. :-)
ChangeSet@1.1094.3.3, 2003-03-11 16:12:28-08:00, uzi@uzix.org
[SPARC64]: Need to export up_clock_tick on uniprocessor.
ChangeSet@1.1094.3.2, 2003-03-11 16:11:23-08:00, uzi@uzix.org
[SPARC64]: Fix warning during uniprocessor build of US3 cpufreq.
ChangeSet@1.1094.3.1, 2003-03-11 15:42:31-08:00, sfr@canb.auug.org.au
[COMPAT]: Sparc64 part of fcntl changes.
ChangeSet@1.1094.2.2, 2003-03-11 15:09:23-08:00, Andries.Brouwer@cwi.nl
[PATCH] some more NAND flash IDs
ChangeSet@1.1094.1.62, 2003-03-11 16:00:30-06:00, mochel@osdl.org
driver model: add bus_rescan_devices()
From Ben Collins
Used as manual trigger for device/driver binding, so drivers can claim
devices that are present but failed to be bound. In case of ieee1394, this
can happen if two computers are attached to a device - the second one won't
be able to claim it until the first detaches.
Changed device_attach() to return 1 when a driver was bound to a device.
Makes it so bus_rescan_devices() can return the number of devices attached.
Tested this with ieee1394 over a bus reset and it worked as expected.
ChangeSet@1.1094.1.61, 2003-03-11 15:30:19-06:00, mochel@osdl.org
sysfs: fix BUG()s on directory creation and removal.
- Don't d_delete() files when removing a directory - they must still be
hashed when dput() reaps them, and it will __d_drop() them anyway.
- Don't d_invalidate() the directory on removal.
- do simple_rmdir() after d_delete() on directory.
- Remove extra dput(), which was causing refcount to go negative, causing
an oops when someone tried to create the directory again.
- Make sure we don't d_delete() or do extra dput() on file when updating,
either.
ChangeSet@1.1094.1.60, 2003-03-11 11:55:31-08:00, hch@sgi.com
[PATCH] i2c-core locking updates
The old adap_lock and driver_lock could deadlock and there was a bunch
of stuff that was horribly racy. The new locking scheme is from
lm_sensors CVS but I had to fix quite a few bugs to make this work.
ChangeSet@1.1094.1.59, 2003-03-11 11:55:23-08:00, hch@sgi.com
[PATCH] update i2c algorithm drivers
This one is from lm_sensors CVS and mostly cosmetic changes. I it up a
bit to compile properly under latest 2.5.
ChangeSet@1.1094.1.58, 2003-03-11 11:55:14-08:00, hch@sgi.com
[PATCH] i2c ID updates
another bunch of IDs appeared in lm_sensors CVS lately..
ChangeSet@1.1094.1.57, 2003-03-11 11:55:07-08:00, hch@sgi.com
[PATCH] missing drivers/video/Makefile entry
This somehow got lost in the uClinux merge.
ChangeSet@1.1094.1.56, 2003-03-11 11:54:58-08:00, hch@sgi.com
[PATCH] remove regular file support from devfs
It's the _device_ filesystem, so regular files are grossly misplaced
here. Fortauntely only one driver actually tries to use it (microcode)
and it's works fine with a regular miscdevice as well.
ChangeSet@1.1094.1.55, 2003-03-11 11:54:50-08:00, hch@sgi.com
[PATCH] remaining bits of DEVFS_FL_AUTO_DEVNUM
Sorry, the devs_only() patch accidentally included the devfs-portion
of the DEVFS_FL_AUTO_DEVNUM patch. This patch contains the remaining
parts.
ChangeSet@1.1094.1.54, 2003-03-11 11:54:41-08:00, hch@sgi.com
[PATCH] fix kmem_cache_size() for new slab poisoning
The new slab poisoning code broke kmem_cache_size(), it now returns
a too large size as the poisoning area after the object is includes.
XFS's kmem_zone_zalloc thus overwrites exactly that area and triggers
the new checks everytime such an object is freed again.
I don't recommend using XFS on BK-current without this patch applied :)
ChangeSet@1.1094.1.53, 2003-03-11 10:55:02-08:00, axboe@suse.de
[PATCH] Fix x86-64 build
ChangeSet@1.1094.1.52, 2003-03-11 09:49:16-08:00, gerg@snapgear.com
[PATCH] fix m68knommu/68360 serial driver to use work_struct
This patches fixes the m68knommu 68360 serial driver to use the
work_struct, not the obsoleted workqueue.
ChangeSet@1.1094.1.51, 2003-03-11 09:49:08-08:00, gerg@snapgear.com
[PATCH] move common timer and vector code for m68knommu/ColdFire/5206
This patch moves common ColdFire vector and timer procesing code from
the local per-processor config.c for the 5206 ColdFire sub-architecture.
All ColdFire CPU's have the same timer and basic vector setup, seems
crazy to repeat this code for each of 6 ColdFire CPU varients.
ChangeSet@1.1094.1.50, 2003-03-11 09:48:58-08:00, gerg@snapgear.com
[PATCH] move common timer and vector code for m68knommu/ColdFire/5206e
This patch moves common ColdFire vector and timer procesing code from
the local per-processor config.c for the 5206e ColdFire sub-architecture.
All ColdFire CPU's have the same timer and basic vector setup, seems
crazy to repeat this code for each of 6 ColdFire CPU varients.
This patch also removes the reset button support, this is now moved to
a proper device driver, where it belongs.
ChangeSet@1.1094.1.49, 2003-03-11 09:48:48-08:00, gerg@snapgear.com
[PATCH] move common timer and vector code for m68knommu/ColdFire/5249
This patch moves common ColdFire vector and timer procesing code from
the local per-processor config.c for the 5249 ColdFire sub-architecture.
All ColdFire CPU's have the same timer and basic vector setup, seems
crazy to repeat this code for each of 6 ColdFire CPU varients.
ChangeSet@1.1094.1.48, 2003-03-11 09:48:38-08:00, gerg@snapgear.com
[PATCH] create common timer code for m68knommu/ColdFire processors
This patch creates common timer setup and handling code for the m68knommu
ColdFire CPU sub-architecture. All 6 ColdFire CPU varients contain the
same hardware timers. Currently each sub-arch has its own timer code.
This reduces a lot of code duplication.
ChangeSet@1.1094.1.47, 2003-03-11 09:48:27-08:00, gerg@snapgear.com
[PATCH] build m68knommu/ColdFire common vectors.c and timers.c
This patch puts the new common ColdFire timers.c and vectors.c into
the build list (in the m68knommu architecture branch).
ChangeSet@1.1094.1.46, 2003-03-11 09:48:18-08:00, gerg@snapgear.com
[PATCH] fix m68knommu/68328 serial driver to use work_struct
This patches fixes the m68knommu 68328 serial driver header to use the
work_struct, not the obsoleted workqueue.
ChangeSet@1.1094.1.45, 2003-03-11 09:48:10-08:00, gerg@snapgear.com
[PATCH] move common timer and vector code for m68knommu/ColdFire/5407
This patch moves common ColdFire vector and timer procesing code from
the local per-processor config.c for the 5407 ColdFire sub-architecture.
All ColdFire CPU's have the same timer and basic vector setup, seems
crazy to repeat this code for each of 6 ColdFire CPU varients.
ChangeSet@1.1094.1.44, 2003-03-11 09:48:02-08:00, gerg@snapgear.com
[PATCH] fix m68knommu COMEM-lite PCI header code
This patch fixes up the PCI bios header for the m68knommu COMEM-lite
PCI hardware support. Adds missing definitions, and a couple of trivial
inline functions here.
ChangeSet@1.1094.1.43, 2003-03-11 09:47:54-08:00, gerg@snapgear.com
[PATCH] include stddef.h in include/linux/list.h
This patches add an include to stddef.h into include/linux/list.h.
It uses the NULL define.
ChangeSet@1.1094.1.42, 2003-03-11 09:47:44-08:00, gerg@snapgear.com
[PATCH] inline some mm functions for MMUless targets
This patch is the last of the MMUless support changes to the mm system.
It inlines for MMUless targets the following functions:
vmalloc_to_page()
follow_page()
remap_page_range()
All of these return NULL for the non-MMU case. Doing the inline here
minimizes changes to assorted mm/ files. This patch was originally
from Christoph Hellwig.
ChangeSet@1.1094.1.41, 2003-03-11 09:47:36-08:00, gerg@snapgear.com
[PATCH] fix m68knommu/68360 Kconfig wrong define
This patch fixes a wrong m68knommu/68360 config define,
CONFIG_68630_SCC -> CONFIG_68360_SCC.
ChangeSet@1.1094.1.40, 2003-03-11 09:47:27-08:00, gerg@snapgear.com
[PATCH] move common timer and vector code for m68knommu/ColdFire/5307
This patch moves common ColdFire vector and timer procesing code from
the local per-processor config.c for the 5307 ColdFire sub-architecture.
All ColdFire CPU's have the same timer and basic vector setup, seems
crazy to repeat this code for each of 6 ColdFire CPU varients.
This patch also removes the reset button support, this is now moved to
a proper device driver, where it belongs.
ChangeSet@1.1094.1.39, 2003-03-11 09:47:19-08:00, gerg@snapgear.com
[PATCH] call schedule_tail() in m68knommu return from fork code path
This patch adds a call to schedule_tail() in the return from fork
post processing.
ChangeSet@1.1094.1.38, 2003-03-11 09:47:11-08:00, gerg@snapgear.com
[PATCH] fix m68knommu/68VZ328/ucdimm Makefile to compile local code files
This patch fixes the m68knomu/68VZ328/ucdimm Makefile to build all its
local code files. Previously it relied on Makefiles above it to do
this. It should be done here.
ChangeSet@1.1094.1.37, 2003-03-11 09:47:00-08:00, gerg@snapgear.com
[PATCH] fix m68knommu/68VZ328/de2 Makefile to compile local code files
This patch fixes the m68knomu/68VZ328/de2 Makefile to build all its
local code files. Previously it relied on Makefiles above it to do
this. It should be done here.
ChangeSet@1.1094.1.36, 2003-03-11 09:46:50-08:00, gerg@snapgear.com
[PATCH] move common timer and vector code for m68knommu/ColdFire/5272
This patch moves common ColdFire vector and timer procesing code from
the local per-processor config.c for the 5272 ColdFire sub-architecture.
All ColdFire CPU's have the same timer and basic vector setup, seems
crazy to repeat this code for each of 6 ColdFire CPU varients.
This patch also removes the reset button support, this is now moved to
a proper device driver, where it belongs.
ChangeSet@1.1094.1.35, 2003-03-11 09:46:42-08:00, gerg@snapgear.com
[PATCH] fix m68knommu COMEM-lite PCI bios code
This patch fixes up a lot of problems in the m68knommu architecture
CO-MEMlite PCI interface code. The code was seriously out of date,
not implementing many of the requried PCI bios support functions.
Also fixes many wrong function return types and arguments.
ChangeSet@1.1094.1.34, 2003-03-11 09:46:32-08:00, gerg@snapgear.com
[PATCH] fix m68knommu/68VZ328 Makefile to traverse sub-dirs
Fix m68knommu 68VZ328 Makefile to only traverse its sub-directories.
There is no local code files for it to compile.
ChangeSet@1.1094.1.33, 2003-03-11 09:46:24-08:00, gerg@snapgear.com
[PATCH] include errno.h in m68knommu 68360 interrupt setup code
Include errno.h in the m68knommu 68360 specific interrupt setup code.
It needs a few E* types as return values.
ChangeSet@1.1094.1.32, 2003-03-11 09:46:15-08:00, gerg@snapgear.com
[PATCH] fix wrong argument prototype in m68knommu/68360 for interrupt handler
Fix wrong argument prototype in m68knommu commproc.c.
ChangeSet@1.1094.1.31, 2003-03-11 09:46:07-08:00, gerg@snapgear.com
[PATCH] m68knommu/de2 should use generic 68328 irq setup.
This patch fixes the m68knommu de2 platform config to use the generic
68328 irq setup. All 68*328 family can use the same setup.
ChangeSet@1.1094.1.30, 2003-03-11 09:45:59-08:00, gerg@snapgear.com
[PATCH] fix spelling in m68knommu Kconfig help
This patch fixes a couple of spelling errors in the m68knommy Kconfig
help entries. Also makes CONFIG_HIGHPROFILE dependant on CONFIG_COLDFIRE,
since that feature is only implemented on ColdFIre based platforms.
ChangeSet@1.1094.1.29, 2003-03-11 09:45:51-08:00, gerg@snapgear.com
[PATCH] m68knommu/ucdimm should use generic 68328 irq setup.
This patch fixes the m68knommu ucdimm platform config to use the generic
68328 irq setup. All 68*328 family can use the same setup.
ChangeSet@1.1094.1.28, 2003-03-11 09:45:41-08:00, gerg@snapgear.com
[PATCH] include errn0.h in m68knommu 68328 interrupt setup code
Include errno.h in the m68knommu 68328 specific interrupt setup code.
It needs a few E* types as return values.
ChangeSet@1.1094.1.27, 2003-03-11 09:45:33-08:00, gerg@snapgear.com
[PATCH] include unistd.h in m68knommu 68328 entry code
Include asm/unistd.h to get the NR_syscalls definition in the
m68knommu 68328 interrupt entry code.
ChangeSet@1.1094.1.26, 2003-03-11 09:45:24-08:00, gerg@snapgear.com
[PATCH] include unistd.h in m68knommu 68360 entry code
Include asm/unistd.h to get the NR_syscalls definition in the
m68knommu 68360 interrupt entry code.
ChangeSet@1.1094.1.25, 2003-03-11 09:36:55-08:00, mzyngier@freesurf.fr
[PATCH] EISA/sysfs update
Here is the latest round of EISA/sysfs update.
- Add documentation,
- Add support for per EISA-id driver data,
- Move virtual_root device to a platform device,
- Update CREDITS.
ChangeSet@1.1094.1.24, 2003-03-11 09:34:25-08:00, sfr@canb.auug.org.au
[PATCH] compat_sys_fcntl{,64} parisc part
Here is the parisc part of the patch with Willy's blessing.
ChangeSet@1.1094.1.23, 2003-03-11 09:34:17-08:00, sfr@canb.auug.org.au
[PATCH] compat_sys_fcntl{,64} s390x part
Here is the s390x part of the patch with Martin's blessing.
ChangeSet@1.1094.1.22, 2003-03-11 09:34:10-08:00, sfr@canb.auug.org.au
[PATCH] compat_sys_fcntl{,64} x86_64 part
Here is the x86_64 part of the patch with Andi's blessing.
ChangeSet@1.1094.1.21, 2003-03-11 09:34:01-08:00, sfr@canb.auug.org.au
[PATCH] compat_sys_fcntl{,64} Generic part
This patch creates compat_sys_fcntl{,64}. The diffstat for the whole
patch set is below, but this is just the generic part, the architecture
specific parts will follow.
This patch also removes struct flock64 from all the 64 bit architectures
(except parisc).
ChangeSet@1.1075.3.99, 2003-03-11 12:56:25-01:00, davej@codemonkey.org.uk
[CPUFREQ] More typos.
ChangeSet@1.1094.1.19, 2003-03-10 23:42:47-08:00, akpm@digeo.com
[PATCH] ext2: fix directory handling bug
Patch from Dave Miller. Fixes a very long-standing bug.
If a process has an fd open against a now-removed directory, lookups on that
fd will end up calling ext2_find_entry() against a zero-length directory.
When this happens ext2_find_entry() will, on the first pass through the loop,
set `kaddr' to page_address(page) - 20. Things get confused and the "zero
length directory entry" warning triggers.
This only happens on 64-bit machines, because ext2_last_byte() is returning
an unsigned (32-bit) value, and the arithmetic works out OK for 32-bit
machines.
So we change ext2_find_entry() to bale out immediately if the directory is
zero-length. All other directory-walking functions do this, but
ext2_find_entry() forgot to, due to the search-from-the-last-place
optimisation.
ChangeSet@1.1094.1.18, 2003-03-10 23:42:39-08:00, akpm@digeo.com
[PATCH] ext3: error handling robustness
Fix a couple of ext3 error handling routines to not assume that the
superblock has valid journal and buffer_head pointers. These functions are
called during mount and unmount and that may not be true.
This should fix the oops which Zwane saw when mounting a corrupt filesystem.
ChangeSet@1.1094.1.17, 2003-03-10 23:42:31-08:00, akpm@digeo.com
[PATCH] Force cache alignment of task_structs
I enabled the advanced use-after-free detector for large slab objects and the
kernel oopsed. This is because that debug code adds things at the head of
the slab objects, and the kernel will die if task_structs are not
well-aligned.
The way to tell the slab allocator that it is not allowed to misalign objects
from this slab is SLAB_MUST_HWCACHE_ALIGN.
ChangeSet@1.1094.1.16, 2003-03-10 23:42:24-08:00, akpm@digeo.com
[PATCH] Fix memleak in ircomm_core
Patch from Oleg Drokin <green@linuxhacker.ru>
There seems to be a memleak on error exit path.
ChangeSet@1.1094.1.15, 2003-03-10 23:42:15-08:00, akpm@digeo.com
[PATCH] Memleak in Windows Logical Disk Manager partition
Patch from Oleg Drokin <green@linuxhacker.ru>
Not freeing allocated memory on error exit path.
ChangeSet@1.1094.1.14, 2003-03-10 23:42:09-08:00, akpm@digeo.com
[PATCH] NCPFS memleak fix
Patch from Petr Vandrovec <vandrove@vc.cvut.cz>
Reported by Oleg Drokin.
In NCP_IOC_SETOBJECTNAME handler, we allocated space (newname pointer),
copy stuff from userspace to there and then assign userspace
pointer to our internal structure, whoops!
ChangeSet@1.1094.1.13, 2003-03-10 23:42:00-08:00, akpm@digeo.com
[PATCH] work around gcc-3.x inlining bugs
Force inlining even when gcc-3.x is too confused to do it for us.
ChangeSet@1.1094.1.12, 2003-03-10 23:41:53-08:00, akpm@digeo.com
[PATCH] fix console ordering default
The conversion of the console registration to an initcall-style thing has
broken lots of people's setups. It is now dependent upon linkage order and
if you have both CONFIG_VT_CONSOLE and CONFIG_SERIAL_CONSOLE, no boot
messages come out on the screen because the kernel is selecting the serial
console first.
It can be fixed by specifying console=tty0, but nobody is doing that.
We can fix it up by placing drivers/char/ in front of drivers/serial/ in
linkage order.
ChangeSet@1.1094.1.11, 2003-03-10 23:41:44-08:00, akpm@digeo.com
[PATCH] pnp warning fix
The pnp_request_card_device() stub should return NULL, not -ENODEV.
ChangeSet@1.1094.1.10, 2003-03-10 23:41:37-08:00, akpm@digeo.com
[PATCH] fix typo in init/Kconfig
ChangeSet@1.1094.1.9, 2003-03-10 23:41:28-08:00, akpm@digeo.com
[PATCH] ACPI suspend/resume locking fix
Patch from Andreas Mohr <andi@rhlx01.fht-esslingen.de>
Need to retake the spinlock in __pdflush() before continuing.
ChangeSet@1.1094.1.8, 2003-03-10 23:39:34-08:00, torvalds@home.transmeta.com
Use cond_sched() instead of manual expansion of it.
ChangeSet@1.1094.1.6, 2003-03-10 17:41:56-08:00, ak@muc.de
[PATCH] x86-64 updates for 2.5.64-bk3
Make x86-64 boot again after the INITIAL_JIFFIES changes
and some bug fixes. Also some work for NPTL.
- Merge with i386/2.5.64-bk3
- Fix memory leak in copy_thread
- arch_prctl uses GDT for base if possible. Cleanup.
- clone supports bases >32bit for SETTLS etc. %fs hardcoded now.
- new ptrace support for 64bit TLS
- Disable (set|get)_thread_* for 64bit processes.
- Audit arch/x86_64 for jiffies wrap issues.
- Fix initial jiffies problem (that caused hanging kernels)
- FIx a few 32bit emulation bugs (sigaltstack, sigqueue)
- Some cleanup from Pavel
- Should compile again as UP
- Shrink size a bit by not putting exception tables into object files.
- Fix compilation with gcc 3.3 :- force inlining when needed
- Work around 2.5.64-bk3 console init bug.
- Fix some alignments in assembly code
ChangeSet@1.1094.1.5, 2003-03-10 17:37:02-08:00, hch@lst.de
[PATCH] remove devfs_only()
Rationale: devfs_only does nothing but disabling {un,}register_blkdev
and {un,}register_chrdev. {un,}register_blkdev already do nothing but
adding it's name argument to a lookup table for the __bdevname and
/proc/device output so this use is already bogus. The disabling of
the character device per-major arrays can work in practice but is
useless as any driver relying on it can't be used on non-devfs systems.
ChangeSet@1.1094.1.4, 2003-03-10 17:36:47-08:00, hch@lst.de
[PATCH] i2c-core.c procfs updates
Cleanup the i2c procfs code a bit (less ifdef mess), partially based
on the lm_sensors CVS code.
ChangeSet@1.1094.1.3, 2003-03-10 17:36:37-08:00, hpa@transmeta.com
[PATCH] Fix $(src) versus $(obj)
This fixes a bunch of "src" versus "obj" confusions that apparently
existed in my bootsect removal patch. How embarrassing...
ChangeSet@1.1094.1.2, 2003-03-10 17:36:27-08:00, akpm@digeo.com
[PATCH] revert "noirqbalance still doesn't do anything"
This recent patch caused Nick Piggin's 2xPIII VIA686B chipset machine into an
interrupts-off lockup during IDE probing.
We don't really know why - it might be because an interrupt is delivered to a
secondary which doesn't expect it.
I have a second patch from Zwane which solves the same problem in a different
way, but until that's had some wider testing I suggest we just back off the
original.
ChangeSet@1.1075.17.5, 2003-03-10 17:32:14-08:00, willy@debian.org
[PATCH] neaten fs/locks.c a little
- Fix my email address to one which reaches me ;-)
- Remove timer.h include as we don't use timers.
- Add module.h.
- Sort includes alphabetically.
- Move EXPORT_SYMBOL from ksyms.c to locks.c.
- Simplify locks_conflict().
ChangeSet@1.1095, 2003-03-10 17:12:51-08:00, kuznet@ms2.inr.ac.ru
[IPV4]: Fix deadlock in IGMP locking.
ChangeSet@1.1075.17.4, 2003-03-10 14:41:27-08:00, torvalds@home.transmeta.com
Use a fixed per-cpu SYSENTER_MSR_ESP value by having the sysenter
entry routine load the real ESP0 off that per-cpu stack. Make this
even faster by putting the sysenter stack in the per-CPU TSS, so
that we can use the tss->esp0 value directly (which we have to
update on task switches anyway).
CAREFUL! This needs very subtle code for debug and NMI exceptions,
to make sure we don't run with the sysenter stack in any real kernel
code!
ChangeSet@1.1075.17.3, 2003-03-10 14:36:20-08:00, torvalds@home.transmeta.com
Remove <asm-i386/xor.h>'s own home-made FPU begin/end macros,
use the real ones instead.
ChangeSet@1.1093, 2003-03-10 11:56:00-08:00, rddunlap@osdl.org
[SNMP]: Fix SNMP_STAT_{USR,BH}PTR.
ChangeSet@1.1075.17.2, 2003-03-10 11:09:48-08:00, kraxel@bytesex.org
[PATCH] v4l: video-buf update
This patch is a update for the video-buf mm helper module. It has
some minor bugfixes and a number of signed/unsigned cleanups to make
gcc 3.3 happy.
ChangeSet@1.1068.14.1, 2003-03-10 12:32:02-06:00, shaggy@shaggy.austin.ibm.com
JFS: Fix hang while flushing outstanding transactions under heavy load
During syncbarrier recovery, when JFS is waiting for all outstanding
transactions to complete before allowing new ones to start, there was a
window where a new transaction starts, but is not committed when JFS thought
it could stop flushing the journal to disk. This caused the log_SYNCBARRIER
flag to not be reset, and no new transactions are allowed to start.
This is fixed by using the log->active field to determine when to reset the
log_FLUSH flag.
ChangeSet@1.1075.17.1, 2003-03-10 10:20:35-08:00, torvalds@home.transmeta.com
Move "used FPU status" into new non-atomic thread_info->status field.
This allows us to avoid having to use atomic updates for the lazy FP
status setting, since we don't have to worry about other CPU's racing
on the fields.
Also, fix x86 FP state after fork() by making sure the FP is unlazied
_before_ we copy the state information. Otherwise, if a process did a
fork() while holding the FP state lazily in the registers, the child
would incorrectly unlazy bogus state.
ChangeSet@1.1075.3.98, 2003-03-10 17:07:10-01:00, davej@codemonkey.org.uk
[CPUFREQ] powernow-k7 lazy voltage setting.
ChangeSet@1.1075.3.97, 2003-03-10 16:59:58-01:00, davej@codemonkey.org.uk
[CPUFREQ] Fix documentation typos.
ChangeSet@1.1075.1.9, 2003-03-09 23:44:44+00:00, ambx1@neo.rr.com
Aditional Card Service Changes
Fixes many issues that were discovered after testing. Also cleans up the
card service code and fixes the card_drvdata bug in which only one driver
at a time could have driver data.
ChangeSet@1.1075.1.8, 2003-03-09 23:41:56+00:00, ambx1@neo.rr.com
OSS SB driver Updates
Compatibility update for the latest changes.
ChangeSet@1.1075.1.7, 2003-03-09 23:39:45+00:00, ambx1@neo.rr.com
ALS100 Updates
Updates the als100 driver to use the pnp apis. Includes resource config
templates.
ChangeSet@1.1075.1.6, 2003-03-09 23:38:08+00:00, ambx1@neo.rr.com
PnP Card Serivice Revisions
This set of changes addresses the following issues with the existing card
service implementation:
1.) Only one driver can be bound to a card.
2.) repetive code is required for pnp_request_card_device and other
functions
This patch will make the card services usable by ALSA.
ChangeSet@1.1075.3.96, 2003-03-09 18:49:41-08:00, torvalds@home.transmeta.com
Cache the MSR_IA32_SYSENTER_CS value in the per-CPU TSS (using
the otherwise unused cpl1 entry for SS), so that we can avoid
re-loading it on task switches if it doesn't change.
ChangeSet@1.1075.3.95, 2003-03-09 18:48:06-08:00, torvalds@home.transmeta.com
Fix nanosleep() problem noticed by Todd Mokros <tmokros@neo.rr.com>.
If we raced on a timer expire, we'd get a negative timeout and think
that is was a _huge_ positive timeout.
ChangeSet@1.1075.1.4, 2003-03-09 23:18:13+00:00, ambx1@neo.rr.com
Interface Changes
A few minor revisions. Simpifies a few commands and adds config mode
information.
ChangeSet@1.1092, 2003-03-09 14:00:34-08:00, green@linuxhacker.ru
[VLAN]: Fix memory leak in procfs handling.
ChangeSet@1.1075.3.94, 2003-03-09 11:25:32-08:00, torvalds@home.transmeta.com
Fix up i387 task switching bug introduced by Andi Kleen's patch
to speed it up - use the proper bitmask for clearing "used-fpu"
state.
ChangeSet@1.1075.3.93, 2003-03-09 10:32:51-08:00, ak@muc.de
[PATCH] Fast path context switch - microoptimize FPU reload
Following some changes on x86-64.
When cpu_has_fxsr is defined to 1 like in many kernels unlazy_fpu can
collapse to three instructions. For that inlining is a very good idea.
Otherwise it's 10 instructions or so, which can be still inlined.
We don't need the lock prefix to test our local thread flags state.
Unfortunately test_thread_flag currently always uses test_bit which
has a LOCK on SMP, but that's unnecessary. LOCK is costly on P4,
so it's a good idea to avoid it.
Work around this for now by testing directly. Better would be
probably to define __set_bit for all architectures to not guarantee
atomicity and then always use that for local thread_info accesses
in linux/thread_info.h
ChangeSet@1.1075.3.92, 2003-03-09 10:31:41-08:00, levon@movementarian.org
[PATCH] fix oprofile on x86 > 1 counter
Without this we have a choice between dropping lots of counter events
for counters > 0, or getting dazed and confused. This brings it inline
with the 2.4 module code. Tested on my 2-way.
Also fix a typo from Steven Cole, and remove some unnecessary code
ChangeSet@1.1075.3.90, 2003-03-09 08:48:42-06:00, jejb@raven.il.steeleye.com
Merge raven.il.steeleye.com:/home/jejb/BK/scsi-misc-2.5
into raven.il.steeleye.com:/home/jejb/BK/scsi-for-linus-2.5
ChangeSet@1.1075.3.89, 2003-03-08 22:39:04-08:00, mbligh@aracnet.com
[PATCH] NUMA scheduler fixup
From: Ingo Molnar <mingo@elte.hu>
This cleans up the NUMA scheduler to have separate triggers for idle
and busy rebalance ratio, preventing some complex interactions where
idle cpus can cause busy ones to busy rebalance more often. The core
functionality of this patch is rebalace_tick().
Tested in -mjb tree for over 1 month ... no problems at all found -
retested on top of 64-bk3 with new scheduler updates.
ChangeSet@1.1075.3.88, 2003-03-08 22:06:03-08:00, akpm@digeo.com
[PATCH] fix a warning in eepro100.c
Remove the unneeded forward declaration of eepro100_remove_one().
It is defeating the __attribute__(unused) tag on the definition of
eepro100_remove_one() and is causing a "defined but not used" warning.
ChangeSet@1.1075.3.87, 2003-03-08 22:05:54-08:00, akpm@digeo.com
[PATCH] revert the "remove kernel_flag" patch
With CONFIG_SMP=n, CONFIG_PREEMPT=y, CONFIG_DEBUG_SPINLOCK=y we get many
undefined refs to kernel_flag.
This is because spinlock debugging works on uniprocessor kernels now, and it
stores state inside the spinlock structure to do this.
Having working spinlock debugging on UP kernels seems more important than
saving four bytes, so...
ChangeSet@1.1075.3.86, 2003-03-08 22:05:45-08:00, akpm@digeo.com
[PATCH] remove compile warning from serial console initcall
Patch from: "Martin J. Bligh" <mbligh@aracnet.com>
This tiny patch removes the new compiler warning from my build - the new
console_initcall mechanism seems to require int from console_init ... I made
serial8250_console_init look like con_init
ChangeSet@1.1075.3.85, 2003-03-08 22:05:36-08:00, akpm@digeo.com
[PATCH] rpc_delete_timer race fix
Patch from Ulrich Weigand <weigand@immd1.informatik.uni-erlangen.de>
Fix a race wherein timer_pending() returns false, but the timer handler is
actually running on another CPU. We need to call del_timer_sync()
regardless, so we wait for completion of the handler.
ChangeSet@1.1075.3.84, 2003-03-08 22:05:27-08:00, akpm@digeo.com
[PATCH] missing spin_unlock() in sysfs_remove_dir()
missing spin_unlock() in sysfs_remove_dir()
ChangeSet@1.1075.3.83, 2003-03-08 19:28:57-08:00, akpm@digeo.com
[PATCH] raw.c: dev_t cleanup and oops fix
Patch from Andries.Brouwer@cwi.nl
The next patch in the dev_t series eliminates the last applied use
of MAX_BLKDEV - only the definition in major.h remains.
Sneaky as I am, I combine this patch with the fix for an Oops:
On open, raw_open does
filp->f_dentry->d_inode->i_mapping =
bdev->bd_inode->i_mapping;
storing a pointer to bdev stuff.
But on release this pointer stayed, the block device is not
referenced anymore and disappears, and the next open references
undefined stuff.
I checked, and this can actually cause an Oops - scenario:
# raw /dev/raw/raw12 /dev/hdf
# dd if=/dev/raw/raw12 of=/dev/null bs=512 count=1
# raw /dev/raw/raw12 0 0
# dd if=/dev/raw/raw12 of=/dev/null bs=512 count=1
Oops.
More precisely the problem is that dentry_open does
file_ra_state_init(&f->f_ra, inode->i_mapping);
And file_ra_state_init uses mapping->backing_dev_info->ra_pages.
Ugly, to use so much information about the inode even before
the inode has been opened.
In the patch below I reset i_mapping upon release of the raw device.
akpm: I fixed a typo and exported default_backing_dev_info to GPL modules for
this.
ChangeSet@1.1075.3.82, 2003-03-08 19:28:48-08:00, akpm@digeo.com
[PATCH] Disable the "Unknown IO_APIC" message
This message is the source of 90% of the traffic on linux-smp and is now
starting to fill up kernel bugzilla.
Nobody has ever actually done anything about it and the message is wasting
people's time. Ingo acked this change.
ChangeSet@1.1075.3.81, 2003-03-08 19:28:39-08:00, akpm@digeo.com
[PATCH] Larger buffer for /proc/interrupts display
Patch from Zwane Mwaikambo <zwane@linuxpower.ca>
Scale the buffer which is used for accumulating the /proc/interrupts output.
On large SMP it overflows.
ChangeSet@1.1075.3.80, 2003-03-08 19:28:30-08:00, akpm@digeo.com
[PATCH] fix SMP lockup in eepro100 with ethtool on unused
Patch from Jason Lunz <lunz@falooley.org>
When support for the GSET and SSET ethtool ioctls was added to eepro100.c in
2.4.20, the tx lock was overloaded to serialize their use. Unfortunately,
this lock is only initialized in dev->open(), causing ethtool to deadlock the
machine when used on an unconfigured eepro100 interface.
The fix is to initialize the spinlock at probe time.
ChangeSet@1.1075.3.79, 2003-03-08 19:28:20-08:00, akpm@digeo.com
[PATCH] i386 show_interrupts() fix
show_interrupts() is accidentally modifying the incoming seq_file pointer.
It goes oops if seq_printf() returns non-zero.
ChangeSet@1.1075.3.78, 2003-03-08 19:28:10-08:00, akpm@digeo.com
[PATCH] protect 'action' in show_interrupts
Patch from Zwane Mwaikambo <zwane@linuxpower.ca>
On SMP or preemptible kernels, every instance of show_interrupts() is oopsily
racy wrt request_irq() and free_irq().
Fix that up by taking the irq_desc_t's lock while walking the action list.
ChangeSet@1.1075.3.77, 2003-03-08 19:27:42-08:00, akpm@digeo.com
[PATCH] Extended attribute sharing and debug macro typo fixes
Patch from Andreas Gruenbacher <agruen@suse.de>
Tony Dziedzic has found two bugs in the extended attributes code. Patches with
explanations are attached.
1: Extended attribute sharing on ext2/ext3 not working
The mb_cache_entry_insert function constantly returns an -EBUSY error
instead of 0, which causes the xattr cache that is needed by the xattr
sharing mechanism on ext2/ext3 to not share anything. This patch fixes
the problem. (It is possible that after applying this fix we will hit
bugs in code that wasn't used before.)
2: Oops in one of the xattr debug statements: The old_bh variable is NULL
if an inode that previously had no EA's assigned would share an EA block
with another inode. (This was hidden by the xattr sharing bug).
ChangeSet@1.1075.3.76, 2003-03-08 19:27:24-08:00, akpm@digeo.com
[PATCH] fix memory leak in load_elf_binary()
- Fix an error-path leak of memory and a dentry in load_elf_binary()
(spotted by Oleg Drokin).
- Tidy up the handling of bad executable images: return -ENOEXEC rather
than 0. (We've committed suicide anyway, so probably nobody gets to see
this).
- Fix up the logic in load_aout_interp(). It gets itself all set up to
return -ENOEXEC but there is in fact no path by which it can do this. Just
return ~0UL on errors, like load_elf_interp().
ChangeSet@1.1075.3.75, 2003-03-08 19:27:07-08:00, akpm@digeo.com
[PATCH] ext2: fix error-path double-free
Fix a double-kfree on an ext2 error path. Reported by Oleg Drokin.
ChangeSet@1.1075.3.74, 2003-03-08 19:26:43-08:00, akpm@digeo.com
[PATCH] hugetlb unmap_vmas() SMP && PREEMPT fix
Patch from Kevin Pedretti <pedretti@ieee.org>
The unmap_vmas() logic is designed to chew away at all the pages without
holding off preemption for too long. But with CONFIG_SMP=y and
CONFIG_PREEMPT=y the number of pages which we batch up between rescheduling
opportunities is not a multiple of HPAGE_SIZE. So unmap_vmas() ends up
calling unmap_hugepage_range() with a poorly aligned&sized region, and it
goes BUG.
Fix that up by ensuring that we always work across hugepage regions in
HPAGE_SIZE chunks.
ChangeSet@1.1075.3.73, 2003-03-08 19:26:21-08:00, akpm@digeo.com
[PATCH] usercopy checks in old_readdir()
Fix up some unchecked copy_to_user()s
ChangeSet@1.1075.3.72, 2003-03-08 19:25:58-08:00, akpm@digeo.com
[PATCH] fix div-by-zero in bonding.c
Patch from: Shmulik Hen <hshmulik@intel.com>
The following patch fixes a division by zero bug in the bonding module that
happens when transmitting through a bond with no slaves, in the XOR bonding
mode.
ChangeSet@1.1075.3.71, 2003-03-08 19:25:21-08:00, akpm@digeo.com
[PATCH] move CONFIG_SWAP around
Patch from Tom Rini <trini@kernel.crashing.org>
Take CONFIG_SWAP out of the top-level menu into the general setup menu. Make
it dependent on CONFIG_MMU and common to all architectures.
ChangeSet@1.1075.3.70, 2003-03-08 19:24:48-08:00, akpm@digeo.com
[PATCH] Fix copy_page_range()'s handling of invalid pages
Patch from Xavier Bru <Xavier.Bru@bull.net>
If copy_page_range encounters a pte which maps an invalid pageframe it will
proceed to try to add an rmap entry against that page. This causes oopses
when an application which has mapped an IO device via /dev/mem forks.
Fix that up by correctly skipping the page_add_rmap() for these pte's.
ChangeSet@1.1075.3.69, 2003-03-08 19:24:29-08:00, akpm@digeo.com
[PATCH] slab debug: symbolic output in caller tracking
use print_symbol() to decode the offender's program counter.
ChangeSet@1.1075.3.68, 2003-03-08 19:24:12-08:00, akpm@digeo.com
[PATCH] slab debug: track caller program counter
Patch from Manfred Spraul <manfred@colorfullife.com>
A patch that records the last kfree caller's program counter
and prints that if a poison check fails.
ChangeSet@1.1075.3.67, 2003-03-08 19:23:55-08:00, akpm@digeo.com
[PATCH] slab use-after-free detector
Patch from Petr Vandrovec <vandrove@vc.cvut.cz>
Modifies check_poison function to not only verify that last byte is
POISON_END, but also that all preceeding bytes are either POISON_BEFORE or
POISON_AFTER bytes.
ChangeSet@1.1075.3.66, 2003-03-08 19:23:39-08:00, akpm@digeo.com
[PATCH] Fix vm_area_struct slab corruption
Patch from Hugh Dickins <hugh@veritas.com>
Hugh's patch fixes vm_area_struct slab corruption due to mremap's move_vma
mistaking how do_munmap splits vmas in one case.
Neither of us are very happy with it - it is fragile, and obscure. Hugh will
revisit this later, but for now it should fix up the potential memory
corruption.
ChangeSet@1.1075.3.65, 2003-03-08 19:23:21-08:00, akpm@digeo.com
[PATCH] Make diskstats per-cpu using kmalloc_percpu
Patch from Ravikiran G Thirumalai <kiran@in.ibm.com>
Makes the disk stats on struct gendisk per-cpu.
ChangeSet@1.1075.3.64, 2003-03-08 19:23:08-08:00, akpm@digeo.com
[PATCH] Allow VFS readahead to fall to zero
Some workloads really, really want to have no readahead. Databases which are
perfoming small synchronous I/Os against a file which has extremely poor
layout. Any readahead at all is a lose here.
But the current readahead code refuses to adapt that low.
Fix it up so that we can indeed adaptively disable readahead altogether, and
do not start it again until we have seen max_readahead()'s worth of
consecutive reads.
ChangeSet@1.1075.3.63, 2003-03-08 19:22:58-08:00, akpm@digeo.com
[PATCH] Implement sendfile() for NFS
Patch from Trond Myklebust <trond.myklebust@fys.uio.no>
Implement sendfile() for the NFS client. This is required for loop-on-NFS
support.
ChangeSet@1.1075.3.62, 2003-03-08 19:22:49-08:00, akpm@digeo.com
[PATCH] fix possible latency in balance_dirty_pages()
Tasks which throttle in balance_dirty_pages() will loop until the amount of
dirty memory falls below the configured dirty_ratio.
This exposes the possibility that one task could be stuck in there for
arbitrary periods of time due to page dirtying activity by other tasks.
The patch changes the logic so that tasks will break out of the loop if they
have written enough pages, regardless of the current dirty memory limits.
Here "enough" pages is 1.5x the number of pages which they just dirtied.
If the amount of dirty memory in the machine happens to still exceed
dirty_ratio (say, due to MAP_SHARED activity) then the task will again
throttle after dirtying a single page. But there is now an upper limit on
the time for which a single task will be captured in balance_dirty_pages().
ChangeSet@1.1075.3.61, 2003-03-08 19:22:37-08:00, akpm@digeo.com
[PATCH] register_blkdev cleanups
Patch from Andries.Brouwer@cwi.nl
The following patch does the following:
- static const char *blkdevs[MAX_BLKDEV]; disappears
- get_blkdev_list, (un)register_blkdev, __bdevname
are moved from block_dev.c to genhd.c
- the third "fops" parameter of register_blkdev was unused;
now removed everywhere
- zillions of places had printk("cannot get major") upon
error return from register_blkdev; removed all of these
and inserted a single printk in register_blkdev.
Of course the reason for the patch is that one fixed size
array is eliminated.
ChangeSet@1.1091, 2003-03-08 15:26:13-08:00, jmorris@intercode.com.au
[CRYPTO]: Documentation updates.
ChangeSet@1.1090, 2003-03-08 13:46:35-08:00, davem@nuts.ninka.net
[ATM]: Add missing $(obj) to driver makefile.
ChangeSet@1.1089, 2003-03-08 13:09:26-08:00, chas@locutus.cmf.nrl.navy.mil
[ATM]: Obsolete some atm_vcc members.
ChangeSet@1.1088, 2003-03-08 13:03:35-08:00, chas@locutus.cmf.nrl.navy.mil
[ATM]: Get lec net_device names correct.
ChangeSet@1.1087, 2003-03-08 11:46:27-08:00, jmorris@intercode.com.au
[CRYPTO]: Eliminate crypto_tfm.crt_ctx, from Adam Richter.
ChangeSet@1.1086, 2003-03-08 11:44:09-08:00, jmorris@intercode.com.au
[CRYPTO]: Add encrypt_iv() and decrypt_iv() methods.
ChangeSet@1.1085, 2003-03-08 11:41:25-08:00, ahaas@airmail.net
[NETFILTER]: C99 initializers for ipv4 netfilter.
ChangeSet@1.1084, 2003-03-08 11:40:27-08:00, ahaas@airmail.net
[NETFILTER]: C99 initializers for ipv6 netfilter.
ChangeSet@1.1083, 2003-03-08 11:39:11-08:00, jmorris@intercode.com.au
[NET]: Nuke SO_BSDCOMPAT.
ChangeSet@1.1082, 2003-03-08 11:38:01-08:00, jmorris@intercode.com.au
[TCP]: Commonize duplicated code into a new function, tcp_bucket_destroy.
ChangeSet@1.1081, 2003-03-08 11:34:54-08:00, jmorros@intercode.com.au
[CRYPTO]: Move km_types out of header.
ChangeSet@1.1080, 2003-03-08 11:30:21-08:00, davem@nuts.ninka.net
Merge nuts.ninka.net:/home/davem/src/BK/network-2.5
into nuts.ninka.net:/home/davem/src/BK/net-2.5
ChangeSet@1.1075.3.60, 2003-03-08 10:24:13-08:00, mbligh@aracnet.com
[PATCH] 6/6 cacheline align files_lock
I'm getting a lot of cacheline bounce from .text.lock.file_table due to
false sharing of the cahceline. The following patch just aligns the lock
in it's own cacheline.
ChangeSet@1.1075.3.59, 2003-03-08 10:24:04-08:00, mbligh@aracnet.com
[PATCH] 5/6 Provide basic documentation for profiling
People keep asking for this info, and Andrew asked me to put it under the
Documentation directory ... provides really simple instructions for taking
a profile so that users can report performance changes in a useful way.
ChangeSet@1.1075.3.58, 2003-03-08 10:23:57-08:00, mbligh@aracnet.com
[PATCH] 4/6 Fix the type of get_zholes_size for NUMA-Q
From Andy Whitcroft
Fix the type of get_zholes_size for NUMA-Q
ChangeSet@1.1075.3.57, 2003-03-08 10:23:49-08:00, mbligh@aracnet.com
[PATCH] 3/6 Convert physnode_map to u8
From Andy Whitcroft
Convert physnode_map from an int to a u8 to save cachelines.
ChangeSet@1.1075.3.56, 2003-03-08 10:23:42-08:00, mbligh@aracnet.com
[PATCH] 2/6 Make CONFIG_NUMA work on non-numa machines.
From Andy Whitcroft
A few very simple changes in order to make CONFIG_NUMA work everywhere, so
the distros can build one common binary kernel for distributions.
ChangeSet@1.1075.3.55, 2003-03-08 10:23:33-08:00, mbligh@aracnet.com
[PATCH] 1/6 Share common physnode_map code between NUMA-Q and Summit
From Andy Whitcroft
Share a common physnode_map structure between NUMA-Q and Summit.
ChangeSet@1.1075.3.52, 2003-03-08 07:53:17-08:00, davem@nuts.ninka.net
[SPARC64]: Make sure update_process_times runs inside of irq_{enter,exit} region.
ChangeSet@1.1075.15.1, 2003-03-08 07:42:49-08:00, rml@tech9.net
[PATCH] no need for kernel_flag on UP
This is a minor cleanup. We currently define and declare the BKL's
kernel_flag spinlock on either SMP or PREEMPT, which means a UP+PREEMPT
machine gets it.
We only need the actual lock on SMP.
ChangeSet@1.1075.14.4, 2003-03-08 09:03:45-06:00, jejb@raven.il.steeleye.com
Fix loop problem in SCSI error handler sense collection
Also remove previous work around so sense is collected now if the
driver doesn't do it automatically.
Also fix a problem where the retries get reset when the command is
reissued (we only want the retries set when the command is first
created).
ChangeSet@1.1075.14.3, 2003-03-08 08:58:09-06:00, jejb@raven.il.steeleye.com
Fix DMA to stack problem in scsi_error.c
ChangeSet@1.1075.14.2, 2003-03-08 08:56:52-06:00, jejb@raven.il.steeleye.com
Correct nested variable thinko in scsi_error.c
ChangeSet@1.1075.13.1, 2003-03-08 09:46:47-01:00, davej@codemonkey.org.uk
[WATCHDOG] amd7xx_tco updates from Zwane, and nuke EXPORT_NO_SYMBOLS
ChangeSet@1.1075.11.10, 2003-03-08 08:46:06-01:00, davej@codemonkey.org.uk
[CPUFREQ] Move pci define to pci_ids.h
ChangeSet@1.1075.11.9, 2003-03-08 08:39:57-01:00, davej@codemonkey.org.uk
[CPUFREQ] update documentation
The sysfs directory where the cpufreq-related files are stored changed due
to the new device interface code, so the documentation needs to be updated
accordingly. Also, add some information about the reference counting and the
exporting of sysfs files by the drivers.
ChangeSet@1.1075.11.8, 2003-03-08 08:39:21-01:00, davej@codemonkey.org.uk
[CPUFREQ] allow cpufreq drivers to export sysfs files
This patch lets cpufreq drivers export per-CPU files in the cpufreq and
cpu-specific sysfs directory. As an example, a file
"scaling_available_frequencies" is added to the p4-clockmod.c driver.
ChangeSet@1.1075.11.7, 2003-03-08 08:38:32-01:00, davej@codemonkey.org.uk
[CPUFREQ] add support for ICH4-M chipset in speedstep driver
Intel ICH4-M soutbridges use exactly the same register interface for SpeedStep
as ICH2-M and ICH3-M southbridges -- which makes adding support for this
bridge (almost) trivial
ChangeSet@1.1075.11.6, 2003-03-08 08:37:39-01:00, davej@codemonkey.org.uk
[CPUFREQ] updated cpufreq ref-counting and locking scheme
This patch takes use of the now-working cpufreq_interface.kset and
cpufreq_policy.kobj to use reference counting within the cpufreq core
wherever this is more appropriate than the previous approach -- using one
semaphore. Additionally, the callbacks to the driver modules are protected
now.
ChangeSet@1.1075.11.5, 2003-03-08 08:36:56-01:00, davej@codemonkey.org.uk
[CPUFREQ] remove unneeded code
- no cpufreq driver uses the frequency table helper "setpolicy" any more
("target" is much more appropriate for them anyways) - so remove
that helper
- all cpufreq drivers use the advanced registration process, so some
compatibility code can safely be removed.
ChangeSet@1.1075.11.4, 2003-03-08 08:36:30-01:00, davej@codemonkey.org.uk
[CPUFREQ] fix userspace governor.
Let's put the sysfs file exported by the cpufreq userspace governor also
into the cpufreq/ - subdirectory of /sys/devices/sys/cpu0/.
ChangeSet@1.1075.11.3, 2003-03-08 08:35:48-01:00, davej@codemonkey.org.uk
[CPUFREQ] fix cpufreq core breakage(s)
- update two more cpufreq-related sysfs files to the new interface
code
- always store the new, user-requested policy in another struct
cpufreq_policy so that we can safely fall back to the old one in
case something fails (this equals the behaviour before Pat's patch)
- the kobject which was registered in cpufreq_add_dev was inside a variable
private to this function -- so the whole cpufreq sysfs interface returned
-EINVAL.
ChangeSet@1.1075.3.51, 2003-03-07 23:01:14-08:00, marcel@holtmann.org
[SPARC64]: Translate AUTOFS_IOC_EXPIRE_MULTI ioctl.
ChangeSet@1.1075.11.2, 2003-03-07 19:37:53-08:00, torvalds@home.transmeta.com
Ignore initramfs cpio file
ChangeSet@1.1075.11.1, 2003-03-07 19:36:34-08:00, torvalds@home.transmeta.com
Avoid warning due to missing return value
ChangeSet@1.1075.3.50, 2003-03-07 19:26:50-08:00, davem@nuts.ninka.net
[SPARC64]: Update defconfig.
ChangeSet@1.1075.9.3, 2003-03-07 19:08:39-08:00, davem@nuts.ninka.net
[SPARC64]: Use pci_remove_bus_device to delete, found by Ben Collins.
ChangeSet@1.1075.9.2, 2003-03-07 18:43:11-08:00, davem@nuts.ninka.net
[FRAMEBUFFER]: Convert SBUS LEO driver to new APIs.
ChangeSet@1.1075.10.2, 2003-03-07 16:46:13-08:00, greg@kroah.com
kbuild: handle any failures of the gen_init_cpio or initramfs image to stop the build.
This also shows how to add files to the initramfs build, but is
commented out.
Patch originally done by Kai.
ChangeSet@1.1075.10.1, 2003-03-07 16:39:06-08:00, greg@kroah.com
gen_init_cpio: Add the ability to add files to the cpio image.
ChangeSet@1.1075.9.1, 2003-03-07 15:37:48-08:00, davem@nuts.ninka.net
[SPARC]: One too many chars in INIT_C_CC
ChangeSet@1.1068.7.3, 2003-03-07 17:01:46-06:00, stevef@smfhome1.austin.rr.com
Fix oops in getdfs when null path passed in on mount. Fix oops when changed readsize caused readpages problem. Add support for altering rsize so can reduce pages read across net
below default of 4
ChangeSet@1.1075.3.46, 2003-03-07 12:19:30-08:00, mingo@elte.hu
[PATCH] "interactivity changes", sched-2.5.64-B2
This fixes the SMP runqueue locking bug when updating the wakers
priority. It also includes:
- only update the priority and do a requeueing if the sleep average has
changed. (this does not happen for pure CPU hogs or pure interactive
tasks, so no need to requeue/recalc-prio in that case.) [All the
necessary values are available at that point already, so gcc should
have an easy job making this branch really cheap.]
- do not do a full task activation in the migration-thread path - that is
supposed to be near-atomic anyway.
- fix up comments
I solved the SMP locking bug by moving the requeueing outside of
try_to_wake_up(). It does not matter that the priority update is not
atomically done now, since the current process wont do anything
inbetween. (well, it could get preempted in a preemptible kernel, but
even that wont do any harm.)
ChangeSet@1.1075.3.45, 2003-03-07 10:43:32-08:00, shemminger@osdl.org
[PATCH] Turn off aio printk meant for debugging (2.5.64)
The following messages are of interest only when debugging aio.
Otherwise, they are just console clutter.
ChangeSet@1.1075.3.44, 2003-03-07 10:43:25-08:00, willy@debian.org
[PATCH] fs/locks.c: fix bugs
- Remove broken lock accounting
- Introduce __locks_delete_block()
- Stop using kdevname()
- Fix locks_remove_posix()
ChangeSet@1.1075.3.43, 2003-03-07 10:41:00-08:00, mingo@elte.hu
[PATCH] more "interactivity changes", sched-B2
- fix a (now-) bug in kernel/softirq.c, it did a wakeup outside any
atomic regions, which falsely identified random processes as a
non-atomic wakeup, and which causes random priority boost to be
distributed.
- reset the initial idle thread's priority back to PRIO_MAX after doing
the wakeup_forked_process() - correct preemption relies on this.
- update current->prio immediately after a backboost.
- clean up effective_prio() & sleep_avg calculations so that there are
fewer RT-task special cases. This has the advantage of the sleep_avg
being maintained even for RT tasks - this could be advantegous for
tasks that briefly enter/exit RT mode.
ChangeSet@1.1075.3.42, 2003-03-07 08:42:40-08:00, green@namesys.com
[PATCH] memleak in drivers/char/vt.c
Seems there is a memleak on error exit path in drivers/char/vt.c, here's
the patch. Found with help of smatch + enhanced unfree script.
ChangeSet@1.1075.7.6, 2003-03-07 10:30:33-06:00, hch@lst.de
[PATCH] remove some braindamage from drivers/scsi/pcmcia/Kconfig
It contains one user-selectable option that does nothing but hiding the
four pcmcia drivers if not seleted (although we have an extra menu for
them!) one one that does exactly nothing. Remove those two.
ChangeSet@1.1075.3.41, 2003-03-07 07:48:46-08:00, mingo@elte.hu
[PATCH] NUMA scheduler breakage
__activate_task() and wake_up_forked_process() should call
nr_running_inc(rq) rather than doing a rq->nr_running++.
Noted by Rick Lindsley
ChangeSet@1.1075.3.40, 2003-03-07 07:44:05-08:00, mzyngier@freesurf.fr
[PATCH] Fix arch/alpha/vmlinux.lds.S typos.
The console initcall patch that went in contains a typo that prevents
alpha from building.
ChangeSet@1.1075.3.39, 2003-03-07 07:43:58-08:00, mzyngier@freesurf.fr
[PATCH] Fix fs/binfmt_elf.c build
The stack reducing patch that recently went in prevent alpha from
building (missing some ELF_CORE_COPY_XFPREGS ifdefs). The excluded
patch fixes it.
ChangeSet@1.1075.3.38, 2003-03-07 07:43:51-08:00, zwane@linuxpower.ca
[PATCH] noirqbalance still doesn't do anything
This one simply sets TARGET_CPUS to cpu_callout_map instead of
cpu_online_map so that when we finally do boot we actually use the other
cpus for servicing interrupts.
ChangeSet@1.1075.3.37, 2003-03-07 07:43:45-08:00, mbligh@aracnet.com
[PATCH] revert pfn_to_nid change.
This change was wrong. pfn_to_nid is a macro.
ChangeSet@1.1075.3.36, 2003-03-07 07:43:37-08:00, mbligh@aracnet.com
[PATCH] Fix NUMA scheduler problem after interactivity merge
NODE_THRESHOLD got accidentally dropped in the interactive scheduler
changes merge. This puts it back.
ChangeSet@1.1075.3.35, 2003-03-07 07:43:30-08:00, david@gibson.dropbear.id.au
[PATCH] Squash warning in ohci-pci.c on PowerBooks
Apple PowerBooks want <asm/prom.h> in ohci-pci.c for the prototype of
pci_device_to_OF_node(). This patch adds it to the already present
list of PowerBook specific #includes:
ChangeSet@1.1075.3.34, 2003-03-07 07:43:23-08:00, david@gibson.dropbear.id.au
[PATCH] Squash warnings in usb-serial.c
This squashes (gcc-3.2) "label and end of compound statement
deprecated" warnings in usb-serial.c.
ChangeSet@1.1075.7.5, 2003-03-07 09:14:42-06:00, willy@debian.org
[PATCH] Some parisc updates for SCSI
The config stanza for SCSI_ZALON was in the wrong place, so move it.
Make SCSI_NCR53C8XX conflict with SCSI_ZALON.
Give ncr53c8xx and sym53c8xx names
Fill in detach and release methods unconditionally.
Call pci_set_master() in sym53c8xx.
Both these drivers need interrupt.h, not sched.h
ChangeSet@1.1025.19.6, 2003-03-07 01:23:06-06:00, kai@vaio.(none)
ISDN/HiSax: Remove amd7930.c
This has been around for many years but was never finished. No
need to carry it on to yet another stable kernel.
ChangeSet@1.1025.19.5, 2003-03-07 01:20:29-06:00, kai@vaio.(none)
ISDN/HiSax: Get rid of CARD_* defines
hisax.h defined a CARD_* macro for each CONFIG option, which
is totally unnecessary, just use the CONFIG option directly.
ChangeSet@1.1025.19.4, 2003-03-07 01:08:04-06:00, kai@vaio.(none)
ISDN/HiSax: Remove unused ISDN_CHIP_* macros
They were only defined, never used.
ChangeSet@1.1025.19.3, 2003-03-07 01:04:07-06:00, kai@vaio.(none)
ISDN/HiSax: config.c cleanup
Consolidate allocation / freeing of various data structures into
one function.
ChangeSet@1.1025.19.2, 2003-03-07 00:56:03-06:00, kai@vaio.(none)
ISDN/HiSax: Introduce probe() functions
Just separate the setup_*() functions of hisax subdrivers
into calls to *_probe() functions, a step towards using
standard initialization and modularization of hisax.
ChangeSet@1.1068.12.8, 2003-03-06 22:28:14-08:00, bjorn_helgaas@hp.com
[PATCH] ia64: IA32 support without sysctl doesn't work
Make CONFIG_SYSCTL control sys32_sysctl as well. Based on a patch from Peter Chubb.
TAG: lia64-v2.5.64
ChangeSet@1.1068.12.7, 2003-03-06 22:21:44-08:00, davidm@tiger.hpl.hp.com
ia64: Minor formatting/whitespace fixes in ia64-version of acpi.c.
ChangeSet@1.1068.12.6, 2003-03-06 22:17:03-08:00, jbarnes@sgi.com
[PATCH] ia64: ACPI fix for no PCI
Andy Grover told me this should be posted here. It allows ACPI to
compile even with PCI turned off. Patch against 2.5.60.
ChangeSet@1.1068.12.5, 2003-03-06 22:04:54-08:00, sfr@canb.auug.org.au
[PATCH] ia64: compat_sys_futex() support
ia 64 part of the patch. This gives you a 32 bit version of sys_futex (hopefully).
ChangeSet@1.1075.8.3, 2003-03-06 21:29:33-08:00, torvalds@home.transmeta.com
Fix a very theoretical race between the new RCU lookup and
concurrent renames in another directory.
I doubt this can be triggered in practice, and the fix is
a bit heavy-handed, but let's see if numbers can show that
the simple fix doesn't show any real lock contention.
ChangeSet@1.1075.8.2, 2003-03-06 21:27:20-08:00, torvalds@home.transmeta.com
Fix "con_init()" function type and stale (and incorrect) declaration
ChangeSet@1.1075.8.1, 2003-03-06 21:12:44-08:00, anton@samba.org
[PATCH] missing include
list.h must now include stddef since it uses NULL.
ChangeSet@1.1068.12.4, 2003-03-06 21:11:54-08:00, davidm@tiger.hpl.hp.com
ia64: Fix several small bugs/omissions from the 2.5.64 sync.
ChangeSet@1.1068.1.25, 2003-03-06 20:21:40-06:00, mochel@osdl.org
sysfs: Fix binary file handling.
From Rusty Lynch:
* makes sysfs cleanup the buffer->data allocated by the attribute write
functions
* fixes a bug that causes the kernel to oops when somebody attempts to
write to the file.
ChangeSet@1.1068.1.24, 2003-03-06 20:19:40-06:00, mochel@osdl.org
sysfs: fix up directory removal, once and for all.
This patch was previously integrated, but dropped erroneously by a bk
merge.
This fixes file cleanup during a sysfs directory removal by deleting files
from ->d_subdirs as they're iterated over, then checking if we can get a
reference on them.
ChangeSet@1.1075.3.30, 2003-03-06 17:57:26-08:00, hpa@transmeta.com
[PATCH] bootsect removal
This is the "boot sector removal" patch for i386 updated for Linux
2.5.63-bk7. The only change against the 2.5.59 version is that the
FDOPTS Makefile variable, which lets one create a floppy image with
arbitrary kernel options, has been merged from the x86-64 version, and
the comments have been updated.
The patch removes the in-kernel boot sector, which these days rarely
work correctly (it only supports up to 1 MB kernels, and only work on
legacy floppies -- not on IDE or USB devices, nor on any kind of
emulated devices like El Torito), replaces it with a placeholder stub,
and sets up the Makefile targets to create floppies or floppy images
using SYSLINUX. The FDOPTS Makefile variable can be used to set
kernel command line options (thanks to a suggestion by Andi Kleen.)
Note that the same change has already been applied to the x86-64
architecture. The last hunk of the patch corrects a comment in that
architecture.
ChangeSet@1.1075.3.29, 2003-03-06 17:49:37-08:00, rmk@arm.linux.org.uk
[PATCH] Fix up pci_scan_bridge and friends
Now we tackle pci_add_new_bus and pci_scan_bridge. The hotplug code
currently uses this, but I'd like it to die off; pci_scan_bridge()
should be used to scan behind bridges. This may mean hotplug needs
some changes to pci_scan_bridge - if so, we need to find out what
changes are required and fix it.
pci_alloc_child_bus() does what pci_add_new_bus() did, except it
doesn't attach the new bus to the parents list of child buses. The
only way this bus can be reached from the parent bus is by scanning
the parents devices list, and locating a device with a non-NULL
subordinate bus. The only code which should be doing this is the
PCI code.
Since the new bus will have an empty list head for bus->node, we can
detect unattached buses prety easily. (see pci-3.diff.)
pci_scan_bridge() changes slightly - we use our new pci_scan_child_bus()
function from pci-3.diff, which doesn't attach devices to the global
tree. This means callers of pci_scan_child_bus() and pci_scan_bridge()
(ie, hotplug) will need to call pci_bus_add_devices().
ChangeSet@1.1075.3.28, 2003-03-06 17:49:30-08:00, rmk@arm.linux.org.uk
[PATCH] Convert setup-bus resource allocation to use bus->devices
- Convert setup-bus.c resource allocation to scan bus->devices rather
than bus->children. As noted previously, newly discovered child
buses will not be on the parents list of children buses, so when
we're trying to assign resources, we need to scan the bus for
devices with subordinate buses rather than using the list of children
buses.
ChangeSet@1.1075.3.27, 2003-03-06 17:49:22-08:00, rmk@arm.linux.org.uk
[PATCH] Only add devices to bus->devices while scanning...
The pci_find* functions search using the following lists:
bus->children (for subordinate buses)
pci_root_buses (for all root buses)
pci_devices (for devices)
This leaves one list which we can add devices to without any drivers
finding the new devices before we've finished with them.
- initialise bus->node list head.
- pci_scan_slot will scan the specified slot, and add the discovered
devices to the bus->devices list only. These devices will not
appear on the global device list, and do not show in sysfs, procfs.
pci_scan_slot returns the number of functions found. If you want
to find the devices, you have to scan bus->devices and look for
devices where list_empty(&dev->global_list) is true.
- new function "pci_bus_add_devices" adds newly discovered devices
to the global device lists, and handles the sysfs and procfs
stuff, making the devices available to drivers. All our buses
which have an empty list head are treated as "new" (since they
are not attached to the parent buses list of children) and are
also added. Currently, no buses will be in this state when this
function is called.
- new function "pci_scan_child_bus" scans a complete bus, building
a list of devices on bus->devices only, performing bus fixups
via pcibios_fixup_bus() and scanning behind bridges. It does
make devices externally visible.
- pci_do_scan_bus retains its original behaviour - ie, it scans
and makes devices available immediately.
ChangeSet@1.1075.3.26, 2003-03-06 17:49:14-08:00, rmk@arm.linux.org.uk
[PATCH] Eliminate stack allocation of struct pci_dev...
- Eliminate the stack allocation of a struct pci_dev, and make
pci_scan_slot() take a bus and a devfn argument.
- Add "dev->multifunction" to indicate whether this is a multifunction
device.
- Run header fixups before inserting the new pci device into any
device lists or announcing it to the drivers.
- Convert some more stuff to use the list_for_each* macro(s).
ChangeSet@1.1075.3.25, 2003-03-06 17:49:06-08:00, rmk@arm.linux.org.uk
[PATCH] Separate out pci bus resource allocator
- Separate out bus resource allocator (pci_bus_alloc_resource)
- Provide pci_enable_bridges to setup command register for all
pci bridges.
ChangeSet@1.1075.3.24, 2003-03-06 17:44:51-08:00, torvalds@home.transmeta.com
Merge home.transmeta.com:/home/torvalds/v2.5/alan
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1068.13.43, 2003-03-06 17:44:28-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] update via driver from 3.35-ac to 3.36
ChangeSet@1.1068.13.42, 2003-03-06 17:44:20-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] fix wrong type and statics in amd ide
ChangeSet@1.1068.13.41, 2003-03-06 17:44:13-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] switch ide taskfile ioctls to ide_execute_command
ChangeSet@1.1068.13.40, 2003-03-06 17:44:05-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove spare cast
ChangeSet@1.1068.13.39, 2003-03-06 17:43:58-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] add sensible names to the ide iops
The outbsync one has further changes to come in the next batch to sort
out some platforms like PPC
ChangeSet@1.1068.13.38, 2003-03-06 17:43:49-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] switch ide-io (core ioctls etc) to ide_execute_command
Also fix the irq masking bug
ChangeSet@1.1068.13.37, 2003-03-06 17:43:42-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] switch ide-floppy to ide_execute_command
ChangeSet@1.1068.13.36, 2003-03-06 17:43:35-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] ide-dma
This switches ide-dma to ide_execute_command and makes IDE DMA also happy
when running shared IRQ
ChangeSet@1.1068.13.35, 2003-03-06 17:43:28-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] bring ide-disk driver into line with 2.4.21pre
This doesn't have the new -ac testing stuff from 2.4.21pre5-ac but it
has the stuff I now trust in it. This fixes the cache flush stuff and
also means ide-disk now should be safe shared IRQ
ChangeSet@1.1068.13.34, 2003-03-06 17:43:18-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] clean up all the console inits using an initcall variant
Dave Woodhouse did this a while ago and its been kicking around in my
tree just fine. This gets rid of a lot of the init lists of functions
still left in the kernel by having an __init type array built up for the
consoles as well
ChangeSet@1.1068.13.33, 2003-03-06 17:43:10-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] correct building of the old ide/hd.c driver
ChangeSet@1.1068.13.32, 2003-03-06 17:43:02-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] correct irq logic for x86
We must not look for a PCI IRQ for a non native mode IDE device
We must write PCI_INTERRUPT_LINE for VIA
ChangeSet@1.1068.13.31, 2003-03-06 17:42:55-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] update PCI quirks
ALi Magik requires workarounds for TV chips
IDE controllers require proper handling in legacy mode
PXB must be disabled on C0 450NX or the IDE will corrupt memory
VIA northbridge devices require the interrupt line is written
NEC_CBUS_2/3 require ISA DMA workarounds
ChangeSet@1.1068.13.30, 2003-03-06 17:42:46-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] ALi it turns out has a 31bit audio device
ChangeSet@1.1068.13.29, 2003-03-06 17:42:37-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] clean up 2.2 stuff in wanrouter code
ChangeSet@1.1068.13.28, 2003-03-06 17:42:28-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] correct file names in comments in mm
ChangeSet@1.1068.13.27, 2003-03-06 17:42:20-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] correct emu10k url
ChangeSet@1.1068.13.26, 2003-03-06 17:42:12-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove 2.0/2.2 stuff from wanrouter
ChangeSet@1.1068.13.25, 2003-03-06 17:42:06-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove 2.0/2.2 stuff
ChangeSet@1.1068.13.24, 2003-03-06 17:41:57-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] add a new PCI quirk type for the ALi Magik series
This chip needs latency and other setups to avoid a PCI/AGP deadlock
with tv cards
ChangeSet@1.1068.13.23, 2003-03-06 17:41:50-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove 2.0 and 2.2 stuff from netfilter
ChangeSet@1.1068.13.22, 2003-03-06 17:41:42-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove 2.2 bits fromw anpipe
ChangeSet@1.1068.13.21, 2003-03-06 17:41:33-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove 2.2 junk from efs
ChangeSet@1.1068.13.20, 2003-03-06 17:41:25-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] Add ELF types for Hitach H8 series
ChangeSet@1.1068.13.19, 2003-03-06 17:41:18-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove unused beep macro on sh
ChangeSet@1.1068.13.18, 2003-03-06 17:41:09-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] correct BUG doc in parisc
ChangeSet@1.1068.13.17, 2003-03-06 17:41:02-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] add serial port table for PC9800
ChangeSet@1.1068.13.16, 2003-03-06 17:40:53-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] kill long unused macro
ChangeSet@1.1068.13.15, 2003-03-06 17:40:46-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] kill the now dead ide_ioreg_t
ChangeSet@1.1068.13.14, 2003-03-06 17:40:38-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] correct BUG doc
ChangeSet@1.1068.13.13, 2003-03-06 17:40:31-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] missed patch - static not extern inline in cia
ChangeSet@1.1068.13.12, 2003-03-06 17:40:23-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] kill stdarg in intermezzo
ChangeSet@1.1068.13.11, 2003-03-06 17:40:16-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] filter more 2.2 junk
ChangeSet@1.1068.13.10, 2003-03-06 17:40:08-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove a pile of 2.0 and 2.2 support
ChangeSet@1.1068.13.9, 2003-03-06 17:39:51-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] fix aic7xxx aicasm build
The -ldb has to be at the end sometimes
ChangeSet@1.1068.13.8, 2003-03-06 17:39:45-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] another typo that escaped
ChangeSet@1.1068.13.7, 2003-03-06 17:39:38-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] more 2.0/2.2 bits
ChangeSet@1.1068.13.6, 2003-03-06 17:39:29-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] more 2.0 crap
ChangeSet@1.1068.13.5, 2003-03-06 17:39:22-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] look a typo 8)
ChangeSet@1.1068.13.4, 2003-03-06 17:39:14-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] exterminate 2.2 gunk from video stuff
ChangeSet@1.1068.13.3, 2003-03-06 17:39:06-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] remove 2.2 compatmac stuff from rio driver
ChangeSet@1.1068.13.2, 2003-03-06 17:38:57-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] minor typo fix that got missed
ChangeSet@1.1068.13.1, 2003-03-06 17:38:50-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] minor breakage fix from typo fixes
ChangeSet@1.1075.3.23, 2003-03-06 17:25:00-08:00, linux@brodo.de
[PATCH] pcmcia: it works again!
platform_device_register may only be called after all class-specific
device data is initialized, or else the class-type add_device call (which
enables the pcmcia sockets) will fail.
ChangeSet@1.1075.3.22, 2003-03-06 17:24:19-08:00, Andries.Brouwer@cwi.nl
[PATCH] scsi_error fix
imm.c: spelling
scsi.h: remove old and now incorrect comment
scsi_scan.c: remove superfluous final return
scsi_error.c: apart from similar trivialities the only change:
If a command fails (e.g. because it belongs to a newer
SCSI version than the device), it is fed to
scsi_decide_disposition(). That routine must return
SUCCESS, unless the error handler should be invoked.
In the situation where host_byte is DID_OK, and message_byte
is COMMAND_COMPLETE, and status is CHECK_CONDITION, there is
no reason at all to invoke aborts and resets. The situation
is normal. I see here UNIT ATTENTION, Power on occurred
and ILLEGAL REQUEST, Invalid field in cdb.
The 2.5.64 code does not return SUCCESS, but it returns the
return code of scsi_check_sense(), and that may be FAILED
in case we do not have valid sense.
ChangeSet@1.1075.3.21, 2003-03-06 17:15:02-08:00, akpm@digeo.com
[PATCH] fix ioremap off by one bug
Patch from Andreas Klein <asklein@cip.physik.uni-wuerzburg.de>
Fixes an off-by-one in ioremap() - local variable `last_addr' is *inclusive*
- it is the last byte of the mapping, not the usual (last byte + 1).
ChangeSet@1.1075.3.20, 2003-03-06 17:14:55-08:00, akpm@digeo.com
[PATCH] ext3: fix error-path memory leak
Fix an error-path memory leak in ext3_fill_super().
ChangeSet@1.1075.3.19, 2003-03-06 17:14:48-08:00, akpm@digeo.com
[PATCH] uninlining in fs/binfmt_elf.c
uninline some functions which have multiple callsites. A 5% reduction in
text size.
ChangeSet@1.1075.3.18, 2003-03-06 17:14:41-08:00, akpm@digeo.com
[PATCH] reduce stack size: elf_core_dump()
Patch from "Randy.Dunlap" <randy.dunlap@verizon.net>
This patch reduces stack size in elf_core_dump() from over 0x400 (0x4a4 e.g.)
to less than 0x100 (0xb0 on a P4 with gcc 2.96).
ChangeSet@1.1075.3.17, 2003-03-06 17:14:34-08:00, akpm@digeo.com
[PATCH] missed unlock_kernel() in ext3+htree
Patch from Alex Tomas <bzzz@tmi.comex.ru>
There's a missing unlock_kernel().
ChangeSet@1.1075.3.16, 2003-03-06 17:14:27-08:00, akpm@digeo.com
[PATCH] remove __pte_offset
Patch from Dave Hansen <haveblue@us.ibm.com>
ptes this time
ChangeSet@1.1075.3.15, 2003-03-06 17:14:20-08:00, akpm@digeo.com
[PATCH] remove __pmd_offset
Patch from Dave Hansen <haveblue@us.ibm.com>
Same thing as the __pgd_offset one, just for pmds this time to keep the
naming consistent.
ChangeSet@1.1075.3.14, 2003-03-06 17:14:13-08:00, akpm@digeo.com
[PATCH] remove __pgd_offset
Patch from Dave Hansen <haveblue@us.ibm.com>
__pgd_offset() and pgd_offset() are completely different functions.
__pgd_offset() is really just a helper to figure out which entry in a
pgd an address would fall into. pgd_offset() does all the leg work and
actually fetches the real pgd entry.
pgd_index() is a much saner name for what __pgd_offset() does. In fact,
we do this:
#define __pgd_offset(address) pgd_index(address)
The attached patch removes all instances of __pgd_offset and just
replaces them with pgd_index.
Compiles with and without PAE on x86.
ChangeSet@1.1075.3.13, 2003-03-06 17:14:05-08:00, akpm@digeo.com
[PATCH] fix inode reclaim imbalance
Well I thought we were shooting down unused inodes a bit aggressively. With
30,000 inodes total and 1000 unused, the 1000 are getting reclaimed
instantly.
shrink_icache_memory() needs to return the number of reclaimable inodes to
page reclaim, not the total number.
ChangeSet@1.1075.3.12, 2003-03-06 17:13:58-08:00, akpm@digeo.com
[PATCH] Reduced stack usage in random.c
Patch from: Matthew Wilcox <willy@debian.org>
Reduces stack use in random.c by 350 (or maybe 700) bytes by sharing a local
array between two functions.
ChangeSet@1.1075.3.11, 2003-03-06 17:13:51-08:00, akpm@digeo.com
[PATCH] export pfn_to_nid to modules
Patch from Patricia Gaughen <gone@us.ibm.com>
This function was recently uninlined for NUMAQ. But it used to be a macro,
and modules need it.
ChangeSet@1.1075.3.10, 2003-03-06 17:13:43-08:00, akpm@digeo.com
[PATCH] cciss: fix initialization for PCI hotplug
Patch from Stephen Cameron <steve.cameron@hp.com>
* Fix driver to wait for firmware to indicate that it is ready.
(Needed for PCI hotplug case, but for normal warm/cold reboot, by the
time driver inits, firmware will already be ready.)
ChangeSet@1.1075.3.9, 2003-03-06 17:13:36-08:00, akpm@digeo.com
[PATCH] sk98lin 64-bit divide fix
This driver is doing a division on a 64 bit valus which is identical to
"jiffies" and is asking for __udiv64. Cast the 64-bit value back to long.
ChangeSet@1.1075.3.8, 2003-03-06 17:13:30-08:00, akpm@digeo.com
[PATCH] rtc lock ranking fix
Patch from: Zwane Mwaikambo <zwane@linuxpower.ca>
Fix up a possible AB/BA deadlock identified by Dawson Engler's latest toy.
ChangeSet@1.1075.3.7, 2003-03-06 17:13:22-08:00, akpm@digeo.com
[PATCH] Fix nfs oops during mount
Patch from Trond Myklebust <trond.myklebust@fys.uio.no>
This has been floating about for a while, and fixes the oops which people
keep on reporting.
ChangeSet@1.1075.3.6, 2003-03-06 17:13:15-08:00, akpm@digeo.com
[PATCH] balance_irq lockup fix
irqdesc_t.lock is taken from interrupts - it needs irq-safe locking from
process context.
Also timer_irq_works() needs to use an unsigned long to hold a jiffies value
(Kai Bankett)
ChangeSet@1.1075.3.5, 2003-03-06 17:13:08-08:00, akpm@digeo.com
[PATCH] i386 IRQ balancing cleanup
General coding cleanups in io_apic.c:
- make pending_irq_balance_apicid[] static
- reorder several functions so that forward decls are not needed and so
that `inline' actually works.
- 80 col fixes.
ChangeSet@1.1075.7.4, 2003-03-06 18:52:50-06:00, willy@debian.org
[PATCH] Remove naked GFP_DMA from drivers/scsi/sr.c
In get_sectorsize(), we can already sleep in scsi_wait_req().
In get_capabilities(), we can use GFP_KERNEL because it is only called
from sr_attach() which already does a GFP_KERNEL allocation.
ChangeSet@1.1075.7.3, 2003-03-06 18:52:19-06:00, willy@debian.org
[PATCH] Remove naked GFP_DMA from drivers/scsi/sd.c
This GFP_DMA can be GFP_KERNEL because sd_init_onedisk calls sd_spinup_disk
calls scsi_wait_req which can sleep.
ChangeSet@1.1075.7.2, 2003-03-06 18:51:48-06:00, hch@lst.de
[PATCH] update qlogic pcmcia support
dito
ChangeSet@1.1075.7.1, 2003-03-06 18:51:16-06:00, hch@lst.de
[PATCH] update fdomain pcmcia support
get it to actually compile cleanly again, switch to scsi_add_host,
remove host list walking.
ChangeSet@1.1079, 2003-03-06 16:30:41-08:00, rddunlap@osdl.org
[IPV4/IPV6]: ICMP cleanups.
ChangeSet@1.1068.11.7, 2003-03-06 18:27:31-06:00, kai@tp1.ruhr-uni-bochum.de
do_mounts: Fix boot from ramdisk
Russell King investigated a failure case I introduced: When booting
with "load_ramdisk=1", we use the kernel root= parameter to determine
from what device to get the contents to copy into a ramdisk and then
mount that ramdisk as root.
For the copy to work, /dev/root needs to point to the device to load the
ramdisk from.
ChangeSet@1.1075.4.1, 2003-03-06 16:17:07-08:00, davem@nuts.ninka.net
[IPSEC]: Fix build when ipsec is disabled.
ChangeSet@1.1068.10.6, 2003-03-07 00:16:38+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add generic SSP "PIO" mode driver
Add SSP PIO driver - provides an interface for talking to
microcontrollers and such like connected to the SA1110's
SSP port.
ChangeSet@1.1068.8.7, 2003-03-06 15:47:22-08:00, greg@kroah.com
[PATCH] USB: unfortunatly, we can't call usb_unlink_urb() right now all of the time.
The host controllers have to be fixed up before we can safely take
out the check for dev->state.
ChangeSet@1.1068.8.6, 2003-03-06 15:46:40-08:00, david-b@pacbell.net
[PATCH] USB: track usb ch9 device state
This patch merges the USB state definitions from the ARM Linux
code (inside the sa1100 driver) and uses them to track what can
be done with the device. That replaces the recently added
"udev->present" flag with a more complete/standard state model.
There are a few changes that might affect behavior if things
start to go really haywire:
- usb_set_address() and usb_set_configuration(), used while
enumerating, handle some unlikely cases more correctly:
don't allow setting address to zero (undefined behavior),
and do allow un-configuring (config 0). (Adds a FIXME
for an existing set-configuration bug too.)
- usb_disconnect() flags the state change earlier (as soon
as it's known).
- usb_submit_urb() works in the states where messaging is
allowed, and also enforces the "unless configured, only
control traffic is legal" rule.
- usb_unlink_urb() doesn't care any more about that state.
(There seemed to be agreement that it must not matter.)
This will help with some further cleanups in the complex of
issues relating to driver removal, device removal, config
changing (with driver unbind and rebind), reset, and so on.
ChangeSet@1.1068.12.3, 2003-03-06 14:56:39-08:00, davidm@tiger.hpl.hp.com
ia64: Hook up POSIX-timer syscalls. Take advantage of ptrace_notify().
ChangeSet@1.1068.8.5, 2003-03-06 13:55:05-08:00, stern@rowland.harvard.edu
[PATCH] USB: Patch for auto-sense cmd_len
This patch fixes an oversight in usb-storage whereby the command length
and command buffer for an automatically-generated REQUEST-SENSE command
would not be initialized properly.
ChangeSet@1.1075.1.3, 2003-03-06 21:50:43+00:00, ambx1@neo.rr.com
Manual Resource Setting Update
This patch allows for partial setting of manual resources as needed by ALSA.
It does not change any existing APIs.
ChangeSet@1.1068.12.2, 2003-03-06 13:42:13-08:00, davidm@tiger.hpl.hp.com
ia64: Correct the value of siginfo.si_addr for SIGSEGV signals
triggered by NaT-page-consumption faults.
ChangeSet@1.1068.12.1, 2003-03-06 13:34:32-08:00, davidm@tiger.hpl.hp.com
ia64: Sync with 2.5.64.
ChangeSet@1.1075.1.2, 2003-03-06 13:14:03-08:00, torvalds@penguin.transmeta.com
Merge
ChangeSet@1.1075.2.1, 2003-03-06 13:08:47-08:00, mingo@elte.hu
[PATCH] "interactivity changes", sched-2.5.64-A6
This includes the following items:
- a new wakeup feature: SMART_WAKE_CHILD (now unconditional) [this is a
reworked version of the wakeup changes from Andrea's tree.]
- scheduler parameter tunings (CHILD_PENALTY, MAX_TIMESLICE,
STARVATION_LIMIT, MAX_SLEEP_AVG)
- activate_task() splitup to separate the interactivity-active variant
from the task-queue variant => this fixes our statistics in some cases.
- finer-grained preemption: if priority is equal then the task with the
longer pending timeslice wins.
- make it possible to disable sync-wakeups via SYNC_WAKEUPS (default:1)
- a naming cleanup (sleep_timestamp => last_run)
- fix up STARVATION_LIMIT usage so that a value of 0 is recognized as 'no
starvation limit'.
It also merges Linus' "priority boost backmerging"
ChangeSet@1.1075.1.1, 2003-03-06 12:59:29-08:00, torvalds@home.transmeta.com
Make the "interactive bonus" work both ways - both the process
that is actually showing interactive behaviour (sleeping) and the
process that wakes up the interative process get a bonus.
This means that processes that help interactive processes (usually
system daemons, and X11 in particular) will themselves get some bonus.
The waker only gets whatever is left over from the "real" interactive
user, to avoid any bad behaviour.
ChangeSet@1.1068.10.5, 2003-03-06 20:34:37+00:00, rmk@flint.arm.linux.org.uk
Merge flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5
into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk
ChangeSet@1.1060.3.18, 2003-03-06 20:26:33+00:00, rmk@flint.arm.linux.org.uk
[CPUFREQ] Make sa11x0_ppcr_to_freq return in units of kHz, not 100kHz.
ChangeSet@1.1078, 2003-03-06 12:08:56-08:00, davem@nuts.ninka.net
[NET]: Do not duplicate verify_compat_iovec in sparc64 solaris module.
ChangeSet@1.1060.3.17, 2003-03-06 19:27:52+00:00, rmk@flint.arm.linux.org.uk
[ARM] CPUFREQ - allow ARM to work with userspace governor.
Patch from Dominik Brodowski.
This patch is necessary to update the ARM drivers so that they can
live with the new cpufreq governor "userspace" (which I sent to Linus a
moment ago).
ChangeSet@1.914.127.34, 2003-03-06 11:22:26-08:00, davidm@tiger.hpl.hp.com
ia64: Make ia64_fetch_and_add() simpler to optimize so lib/rwsem.c
can be optimized properly.
TAG: lia64-v2.5.60
ChangeSet@1.1077, 2003-03-06 11:09:59-08:00, bcrl@redhat.com
[NET]: Simplify scm handling and sendmsg/recvmsg invocation, consolidate net compat syscalls.
1) Pull scm argument from sendmsg/recvmsg, it is available
from I/O control block
2) Consolidate networking syscall compat call into net/compat.c
3) Change ops->{sendmsg,recvmsg}() code sequences into sock_{sendmsg,recvmsg}()
ChangeSet@1.1073.1.1, 2003-03-06 10:42:03-08:00, alan@lxorguk.ukuu.org.uk
[NETFILTER]: Remove 2.0 and 2.2 stuff from netfilter.
ChangeSet@1.1025.20.3, 2003-03-06 09:36:37-08:00, ink@jurassic.park.msu.ru
[PATCH] alpha pcibios_claim_console_setup fix
pcibios_claim_console_setup() doesn't look behind PCI-PCI bridges.
Noticed by Anton Blanchard.
Ivan.
ChangeSet@1.1073, 2003-03-06 09:11:27-08:00, laforge@netfilter.org
[NETFILTER]: Fix ipv6 build.
ChangeSet@1.1072, 2003-03-06 09:08:59-08:00, jmorris@intercode.com.au
[IPV4]: Fix multicast route lookups.
ChangeSet@1.1060.3.16, 2003-03-06 16:49:18+00:00, rmk@flint.arm.linux.org.uk
[CPUFREQ] Update ARM CPUFREQ drivers
A 4 patch set from Dominik Brodowski, tested and fixed up by rmk
for ARM.
(1)
- the system3.c cpufreq notifier couldn't possibly compile before because
cpufreq_updateminmax has been undefined for ages.
- clean up sa1100fb.c notifier to specify exactly what's left TBD.
- double #include of cpufreq.c in drivers/pcmcia/sa1100_generic.c
(2)
Split up config symbols, add help text for CPU_FREQ_PROC_INTF
(3)
- update the Integrator CPUfreq driver so that it can get along with
cpufreq policies.
- modularize Integrator CPUfreq driver (all it did with
!CONFIG_CPU_FREQ was to print out some debug information)
(4)
- update the SA11x0 CPUfreq drivers so that they can get along with
cpufreq policies and governors.
- update the cpufreq core so that cpufreq_get() returns something
sensible during the first ->setpolicy or ->target call.
ChangeSet@1.1060.3.15, 2003-03-06 16:27:13+00:00, rmk@flint.arm.linux.org.uk
[ARM] Clean up ARM PCI support (bios32.c)
Eliminate have_isa_bridge - use isa_bridge instead.
Clean up PCI bus walking.
Clean up detection of fast back to back capability.
Ensure we set the bridge control register appropriately.
Pin swizzle functions are never called with pin == 0.
ChangeSet@1.1060.3.14, 2003-03-06 16:09:12+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add better PM support to SA1111 and SA11x0.
This follows our existing PM interfaces.
ChangeSet@1.1060.3.13, 2003-03-06 16:01:00+00:00, rmk@flint.arm.linux.org.uk
[ARM] Power management updates
This provides an element of core PM support to ARM, providing an APM
like user space interface, and separating the core PM support from
the SA1100 PM implementation.
ChangeSet@1.1060.3.12, 2003-03-06 15:53:08+00:00, rmk@flint.arm.linux.org.uk
[ARM] Ensure we preserve other CPSR bits when switching to SVC mode.
ChangeSet@1.1060.3.11, 2003-03-06 14:58:36+00:00, rmk@flint.arm.linux.org.uk
[ARM] Update mach-types to latest vesion.
ChangeSet@1.1060.3.10, 2003-03-06 14:53:11+00:00, rmk@flint.arm.linux.org.uk
[ARM] Make TLB instruction selection more fine-grained
This eliminates some unnecessary branches and instructions in the
TLB flush macros where configurations allow for this to occur.
ChangeSet@1.1060.3.9, 2003-03-06 14:44:32+00:00, rmk@flint.arm.linux.org.uk
[ARM] Fix ARM ide.h
Kill ide_* resource handling. Add __ide_mm* macros to use our string
based mmio.
ChangeSet@1.1060.3.8, 2003-03-06 14:07:07+00:00, rmk@flint.arm.linux.org.uk
[ARM] Kill old mkdep dependency hack.
We include a header file in an indirect method, which mkdep didn't
understand. Now that mkdep is gone, we don't need the hack to make
mkdep do the right thing.
ChangeSet@1.1060.3.7, 2003-03-06 14:03:09+00:00, rmk@flint.arm.linux.org.uk
[ARM] Make ARM's pci_controller_num dev argument appear to be used.
This cuts down on the number of warnings during the build.
ChangeSet@1.1060.3.6, 2003-03-06 13:58:40+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add dummy set_pgd() implementation.
ChangeSet@1.1060.3.5, 2003-03-06 13:54:01+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add new kernel typedefs for __kernel_{timer,clockid}_t.
ChangeSet@1.1060.3.4, 2003-03-06 13:41:45+00:00, rmk@flint.arm.linux.org.uk
[ARM] Always claim the timer IRQ using SA_INTERRUPT.
ChangeSet@1.1060.3.3, 2003-03-06 13:18:58+00:00, rmk@flint.arm.linux.org.uk
[ARM] Always call schedule_tail() after a fork()
ChangeSet@1.1060.3.2, 2003-03-06 13:14:56+00:00, rmk@flint.arm.linux.org.uk
[ARM] Convert ecard.c shutdown/reboot to use driver model
ecard.c used to use the reboot notifier to ensure that the expansion
cards are in the correct state for rebooting. Use the driver model
shutdown method instead.
ChangeSet@1.1060.3.1, 2003-03-06 13:01:35+00:00, rmk@flint.arm.linux.org.uk
[ARM] Remove set_mac_address from acorn drivers.
Acorn Ethernet drivers provided a duplicate set_mac_address
implementation which reflects the generic ethernet version in
drivers/net/net_init.c. Use the generic version instead.
ChangeSet@1.1068.10.4, 2003-03-05 21:39:41-08:00, torvalds@home.transmeta.com
Fix up some timeouts to use the proper types.
(While "signed long" is the same in practice, it is technically
incorrect, and the new anal type-checker complains).
ChangeSet@1.1068.10.3, 2003-03-05 21:22:59-08:00, davem@nuts.ninka.net
[JIFFIES]: Use typecheck in time_foo jiffies macros.
ChangeSet@1.1068.10.2, 2003-03-05 21:22:16-08:00, davem@nuts.ninka.net
[KERNEL]: Add typecheck macro for verifying types at compile time.
ChangeSet@1.1068.11.6, 2003-03-05 20:09:49-06:00, sam@mars.ravnborg.org
[PATCH] kbuild: touch-module after successfull creation only
On Mon, Mar 03, 2003 at 05:11:10PM -0500, Bill Davidsen wrote:
> scripts/Makefile.modinst:16: *** Uh-oh, you have stale module entries. You
messed with SUBDIRS, do not complain if something goes wrong.
This happens if you have encountered a compile error in a module.
In this case you did not succeed the compilation of fs/binfmt_aout,
and therefore no .o file can be located.
kbuild assumes this is because you have messed with SUBDIRS, which is wrong.
ChangeSet@1.1068.11.5, 2003-03-05 20:07:18-06:00, arnd@arndb.de
[trivial] avoid a warning for each module on s390x
s390x has a reference to _GLOBAL_OFFSET_TABLE_ in each module
that is resolved by the module loader. This patch prevents
modpost from emitting a warning about that symbol.
ChangeSet@1.1068.11.4, 2003-03-05 20:05:54-06:00, sam@mars.ravnborg.org
[PATCH] kbuild: Smart notation for non-verbose output
Create a nice shorthand to enable the non-verbose output mode.
make V=1 => Gives verbose output (default)
make V=0 => Gives non-verbose output
One of the reasons why people does not use KBUILD_VERBOSE=0 that
much is simply the typing needed.
This notation should make it acceptable to type it.
The usage of "make V=0" is restricted to the command line.
Anyone that wants to enable the non-verbose mode pr. default shall
set KBUILD_VERBOSE in the shell.
ChangeSet@1.1068.11.3, 2003-03-05 19:53:26-06:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Make per-cpu-check ignore __crc_ symbols.
We warn when symbols end in __per_cpu, but aren't in the per-cpu section.
However, checksum symbols gave false positives.
ChangeSet@1.1068.11.2, 2003-03-05 19:51:34-06:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Add some missing FORCE
Those were missing, not particularly harmful, but still needed for
correctness.
ChangeSet@1.1068.11.1, 2003-03-05 19:50:32-06:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Make build stop on vmlinux link error
set -e is needed for each (continued) line.
ChangeSet@1.1071, 2003-03-05 15:50:01-08:00, miyazawa@linux-ipv6.org
[IPSEC]: Add full ipv6 support.
Credits also to Mitsuru Kanda <kanda@karaba.org>,
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>,
and Kunihiro Ishiguro.
ChangeSet@1.1068.9.4, 2003-03-05 17:44:21-06:00, mochel@osdl.org
cpufreq: fix compile error.
Use ->dev instead of ->intf.dev in struct cpufreq_policy. Introduced whilst
cleaning up part of the cpufreq code.
ChangeSet@1.1068.9.3, 2003-03-05 17:38:05-06:00, mochel@osdl.org
sysfs: don't complain when sysfs can't register.
During startup, sysfs won't succeed in registering with itself, because
it's not yet inititialized. This was causing an unnecessary error on boot.
ChangeSet@1.1068.9.2, 2003-03-05 17:33:10-06:00, mochel@osdl.org
driver model: fix platform_match()
- Make it compare the name in struct platform_dev to the driver's name.
From Dominik Brodowski
ChangeSet@1.1068.9.1, 2003-03-05 17:27:00-06:00, mochel@osdl.org
sysfs: Make sure root inode is executable and readable by everyone.
ChangeSet@1.1068.1.22, 2003-03-05 14:25:25-08:00, levon@movementarian.org
[PATCH] Fix oprofile on UP, small additional fix
The below has been in -mm for a while, and has been tested on my UP
and 2-way machines.
OProfile was completely unsafe on UP - a spinlock is no protection
against the NMI arriving and putting data into the buffer. Pretty stupid
bug. This fixes it by implementing reader/writer windows in the buffer
and removing the lock altogether. This patch was originally done by Will
Cohen.
It also fixes the oops Dave Hansen saw on 2.5.62 SMP
ChangeSet@1.1068.8.4, 2003-03-05 12:06:48-08:00, greg@kroah.com
[PATCH] USB: added support for radio shack device to pl2303 driver.
Thanks to gene_heskett@iolinc.net for the info for this.
ChangeSet@1.1068.1.21, 2003-03-05 11:57:07-08:00, andmike@us.ibm.com
[PATCH] Fix SCSI error handler abort case
I had my list empty checks reversed if aborting and bus device reset
failed. The condition that causes the error handler to run is still
unknown.
ChangeSet@1.1068.8.3, 2003-03-05 11:44:45-08:00, andre.breiler@null-mx.org
[PATCH] io_edgeport.c diff to fix endianess bugs
attached a fix for the io_edgeport usb serial driver
This diff fixes endianess issues which prevented the driver to work on
bigendian machines (e.g. sparc).
ChangeSet@1.1068.8.2, 2003-03-05 11:43:00-08:00, clemens@ladisch.de
[PATCH] usb-midi.h: fixes for SC-8820/50
sync with Nagano's version:
- protect vendors ids against multiple definitions
- sort Roland device ids
- fix SC-8850 cable bitmask
- add quirk for the SC-8820
- add quirk for the MOTU Fastlane
ChangeSet@1.1068.8.1, 2003-03-05 11:41:00-08:00, greg@kroah.com
[PATCH] USB: add support for Treo devices to the visor driver.
Finally...
ChangeSet@1.1025.20.2, 2003-03-05 10:16:58-08:00, Jeff.Wiedemeier@hp.com
[PATCH] enable setting of marvel/titan agp->type
Now that the agpgart support is in, this can be enabled.
/jeff
ChangeSet@1.1068.1.20, 2003-03-05 08:23:08-08:00, davem@nuts.ninka.net
[SPARC64]: Fix cpufreq config deps.
ChangeSet@1.1068.1.18, 2003-03-05 07:36:20-08:00, davem@redhat.com
[PATCH] Fix time comparison typing bugs.
Many places use inappropriate types for comparing jiffies,
int for example. Fix those places up.
ChangeSet@1.1068.1.17, 2003-03-04 19:11:19-08:00, torvalds@home.transmeta.com
Linux 2.5.64
TAG: v2.5.64