\documentstyle[bsf,cverbatim]{article}
\begin{document}

\begin{center}
<  \Large Obtaining Files By Anonymous FTP \\>
\ \\
(\it Adapted from RFC 1175\rm) \\
\ \\
\end{center}

   Files may be obtained with the FTP program in conjunction with an
   ANON\-Y\-MOUS login.  Versions of the FTP program may vary from system to
   system, so the commands shown in this example may need to be modified
   to work on your system.

\begin{cverbatim}
       % ftp nic.funet.fi  <== Use the FTP program to
                                    connect to nic.funet.fi
       Connected to nic.funet.fi
       220 nic.funet.fi FTP server (Version 4.471 Feb 21 19:27:02 EET) ready.
\end{cverbatim}

   The system should respond with a message to indicate that a
   connection has been made.  Users on a Unix system will probably be
   prompted for a login name.  Type in "anonymous" as in the example
   below:

\begin{cverbatim}
       Name (nic.funet.fi:user): anonymous
       331 Guest login ok, send ident (your email address) as password.
       Password:    <== Type in <your-email-address> at the password prompt
\end{cverbatim}

   Other systems may require the use of a "login" or "user" command to
   send the username to the server computer.  Users unsure of the
   command should contact a local site representative for the specific
   commands.

   After the username and password are sent to the system, a message to
   indicate that the login has been made successfully should appear:

\begin{cverbatim}
       230-Guest login ok, access restrictions apply.
       230-Local time is now Sat May 11 11:42:12 1991
       230-There are constant overload problems on our line to USA...
       230-  Be careful with "cd ..".  See  /README for info about how
       230-  symlinks might affect your view of, and movement in archive.
       230-We have special access features, see file /README
       230 It was last updated Thu Feb 21 19:30:35 1991 - 78.6 days ago
\end{cverbatim}

   The user then connects to the directory in which the document to be
   retrieved resides. This is done with the cd command:

\begin{cverbatim}
       ftp> cd pub/misc/computer-english
       250 CWD command successful.
\end{cverbatim}

   The user should now be connected to the computer-english directory.
   The "dir" or "ls" command will list the files available in this directory.

\begin{cverbatim}
       ftp> dir
       200 PORT command successful.
       150 Opening ASCII mode data connection for .
       *** At this point a list of the files in the directory
           should appear **
       226 Transfer completed.
\end{cverbatim}

   The "get" command will get any file in the directory.

\begin{cverbatim}
       ftp> get 1-Introduction.tex
       200 PORT command successful.
       150 Opening ASCII mode data connection for 1-Introduction.tex (4482 bytes).

       226 Transfer complete.
       4482 bytes received in 2 seconds (2.2 Kbytes/s)
\end{cverbatim}

   The "quit" command leaves the FTP program.

\begin{cverbatim}
       ftp> quit
       221 Goodbye.
\end{cverbatim}
\end{document}

